SDL Trados Studio 2011 Preview: Can It Convince Trados 2007 Faithfuls?

SDL have been drumming up interest for SDL Trados Studio 2011 through the summer. Eventhough the successor to SDL Trados Studio 2009 is announced to release at the end of September, I must admit that I have been slower to turn my attention to it than I was with Studio 2009.

This is in part due to my current occupation which brings me to spend more time using Translation Management Systems than CAT tools. But it is also because SDL Trados Studio 2009 was such an exciting breakthrough: the idea of fully integrating SDLX, Trados and Synergy was a major shift. The technology behind the new Studio file formats (.sdlxliff bilingual files, .sdltm Translation Memories, and .sdltb Term database) was also quite promising. Lastly, the productivity improvements were many thanks to the entirely new xml-based TM engine, which allows multiple TMs look-ups, AutoPropagation™, AutoSuggest™, QuickPlace™, Real-Time Preview etc.

Reading through those posts about SDL Trados Studio 2009 reminds me how attractive it seemed. But there was also a distinct possibility that this substantial innovation would not necessarily cause a mass migration of Trados 2007 users. Budgets were tight due to the worldwide recession. The prospect of migrating entire Localisation production chains seemed like an unnecessary overhead. Users would have to be re-trained, Enterprise and LSP proprietary automation redesigned in order to work with those new file formats. Above all, SDL Trados 2007 was delivering perfectly acceptable services.

Sure enough, two years later, empirical evidence suggests Trados 2007 is alive and well. It is apparent in my daily interaction with Localisation professional around the World. All Trados users are aware of Studio by now, but I’d venture to say all of them still have Trados 2007 installed, and that it probably even remains their SDL tool of choice. Assuming the hits on Localization, Localisation have any statistical value, it is a telling sign that SDL Trados 2007: Quick Guide for the Complete Beginner continues to be the most frequently visited post in these pages, 2.5 years after being posted. But then perhaps that’s my own fault, for not making a beginner’s guide to Studio 2009…

So let’s now turn to the future and look at SDL Trados Studio 2011’s prospects. New comers to the CAT tools market will inevitably consider Trados as one of their options; which new features it offers does not matter much. As for existing Studio 2009 users, I doubt any amount of innovation can make them upgrade if they haven’t already a budget or subscription plan which allows for systematic upgrades. The real measure of the impact of Studio 2011 will be whether it can convince the remaining Trados 2007 users.

What does SDL Trados Studio 2011 bring to the table to meet the needs of this demographic?

Some New Features

All the great advances made with Studio 2009 are of course still available, although some of them have matured. The main highlights in terms of novelty are the return of Perfect Match and the focus on productivity during review cycles.

Perfect match 2.0

Perfect Match makes a return to Trados: it existed in Trados 2007 but was absent in Studio until now. It now co-exists with Context Match, and together with Terminology and Sub-Segment leveraging make up the concept of Total Leveraging.

The differences between Perfect and Context Matches are:

• Perfect Match can run on a batch of files (right-click a bilingual file to pre-translate and select Batch Tasks > Perfect Match) and is good for Project rather than document updates.
• SDLXLIFF, TTX and ITD are all supported.
• Context Match runs on successive versions of the same file, file names have to match.
• They are marked as PM and CM respectively in the resulting bilingual files. Both segment types are locked.

Track changes

Studio 2011 uses a change tracking technology which is fully compatible with Microsoft Word. Thanks to the SDL XLIFF Converter, an SDL Open Exchange add-on now included in Studio, changes and comments made in Trados can be viewed, accepted etc. in Microsoft Word and vice versa.

This makes it easy to collaborate with users who do not have Studio during the review process. Whether they are linguists using other CAT tools or Subject Matter Experts not familiar with any CAT tool, they will all be able to input their feedback using Word.

The versions of Word officially supported are 2007 and 2010; 2003 should work but this is unconfirmed for now. Track Changes can be turned on or off for different parts of the process such as Translation, Review or Signoff under Options > Tools.

Display Filters

In Trados Studio, segments can be filtered to show only those relevant to the current task. The filters in this list are another way Studio 2011 helps productivity during review, with new options such as Segments with Comments or Segments with Track Changes. These filters can also be applied during export using the SDL XLIFF Converter.

Improved Spell Checkers

Trados Studio 2011 brings the Microsoft Spell Checker back. Hunspell is still available but users can now configure which checker to use for each language. This is to resolve issues present in the Studio 2009 Spell Checkers which were not fully accurate for certain languages, notably Scandinavian ones.

QA Checker 3.0

QA Checker 3’s claim to fame is the interactive dialog box which makes reviewing and implementing reported issues a much clearer process. It is reportedly also a first step in longer term plans of adding grammar checks.

Enhanced File Filters

Studio 2011 includes new filters for:

• OpenOffice, Libre Office, StarOffice and IBM Lotus Symphony.
• INX and Java properties.
• improved FrameMaker MIF support.
• bilingual Word files which can now be edited directly.

Other novelties to discover in Trados Studio 2011 include pseudo-translation, for testing parsing rules and settings before the launch of new Project Types. Character, rather than just wordcount is now also available.

An Evolving Image

Lighter Ownership Experience

First impressions tend to last, and the installation and activation process are a big part of how a new application is experienced by users. In Studio 2011 the installation is made simpler. One single installer enables compatibility with Trados 2007 file formats (.ttx, .itd, TM upgrades and alignment tasks). With TTXit!, freely available on SDL Open Exchange, users should no longer need a copy of Trados 2007 in addition to Studio.

Because the user interface and technology in Studio 2011 are so similar to Studio 2009, no big learning curve is required. Any time and effort invested in learning to use Studio will just give users a head start in being proficient at the new version.

Starting a project itself is a simpler process, with only 3 files needed (source, bilingual and TM), and no associated folder structure in the background.

The standalone License Manager has been replaced. Activation is now fully integrated into Studio, and borrowing licenses are supported.

Finally, the SDL Multiterm Widget is being pushed into the limelight. This taskbar tool lets you browse Terminology from external applications like Microsoft Excel, Powerpoint etc. at the touch of a button. It also provides a handy shortcut to searches in Google or Wikipedia and is now included in Trados Studio.

Expanding the Trados Community

Technology webinars have been an SDL strength for a long time now. Call it free education or a carbon-conscious alternative to business trips, they are an efficient way for any technology vendor to showcase their goods.

There are other ways SDL share information about Trados like the Studio 2011 Series on the SDL Blog, or the SDL Trados Youtube channel. SDL are certainly not the only language technology provider to use new media but I think it’s fair to mention their consistent effort to meet their user community and ensure information is widely available.

SDL OpenExchange is also used to promote this spirit of community with Developers (look out for prize competitions!) and has produced a number commercial as well as free Apps which efficiently respond to very specific needs.

The connectivity with SDL’s Enterprise applications is also kept up to date. Studio 2011 can connect to WorldServer or TMS Translation Memories for Concordance just like it would with local TMs. An Express Edition of Studio 2011 will be released for users who need Studio only for WorldServer projects.

Advertisement

SDL Studio Online 2011: the New Face of TMS

Hot on the heels of SDL TMS 2011 which was recently reviewed here, SDL Technologies released SDL Studio Online 2011.

In a nutshell, SDL Studio Online 2011 is an optional add-on exclusive to SDL TMS 2011. It is distributed as part of the SDL TMS  2011 Service Pack 1 and upgrades the SDL TMS Translator Interface. While SDL TMS 2011 introduced a new Carbon Theme, its Translator Interface was in fact still a slim version of SDLX 2007. SDL Studio Online 2011 replaces it with an SDL Trados Studio inspired successor.

From a linguist’s point a view this is an important leap forward. Together with the performance improvements promised with the original release of SDL TMS 2011, this could significantly increase the proportion of linguists working online. Translators, and sometimes even Reviewers, have tended to choose to download SDL TMS packages rather than working online. This somewhat defeats the purpose of having an online translation environment with real-time TM and Terminology updates capabilities. Yet it has remained a popular choice mainly for two reasons:

1. Combined server and user-side performance issues: this should already improve with an upgrade to the original SDL TMS 2011.
2. Translation Interface too basic compared to desktop CAT tools: this is what this optional SDL TMS 2011 SP1 add-on proposes to address

Studio Online provides a number of tangible improvements over the standard Translation Interface:

• Improved performance for linguists working online with the more modern interface featuring:
  • Segment-level lookup
  • Concordance lookup
  • Flexible tag display and editing
  • Find and replace functionality across the entire task
  • Integral spell checking with Inline and batch spell checking, multilingual dictionary and correction and user-specific dictionaries.
• Reduced need for training and support for the growing number of linguists unfamiliar with SDLX
• Reduced file management overhead thanks to a more attractive online environment
• Increased proportion of linguists connecting to online linguistic assets rather than working from periodic downloads
• Licensing and upgrade management owned by the client
• Support for Microsoft input method editors (IMEs) for typing East Asian characters on non-matching language versions of Office.

Requirements and setup information

Studio Online is a Microsoft Silverlight plug-in. It requires Microsoft Silverlight 4 and the latest available Service Pack for Windows. Its upgrade or installation process is guided in Studio Online.

Other requirements are Microsoft Internet Explorer 6.0, 7.0, or 8.0 and Mozilla Firefox 3.5 or 3.6.

Studio Online Licenses have to be purchased in addition to the SDL TMS licenses for a specific number of concurrent users. Once installed and licensed, each user may choose to configure SDL Studio Online as their default editor in SDL TMS by going to Home – My Details – User Preferences and checking the option Use SDL Studio Online (see screenshot). This remains optional, so not all users have to make this choice. Task download for offline work also remains available in any case.

One limitation to note is that SDL Studio Online 2011 does not integrate with the QA Models. If you have made use of the online rating function added since SDL TMS 2007 SP4, you will have to make a choice between that and the new online interface. My inclination would be towards allowing the Translators to use Studio Online to make it more acceptable for them to stay online throughout the translation process. On another hand, Reviewers could continue using the old interface so that they use the QA Model, and so that you save on Studio Online licenses.

SDL TMS 2011: Inner Peace

The pace of release of Enterprise Technology such as Workflow and Translation Management Systems is usually slower than that of end-user applications such as CAT tools.

The reasons for this are easy to understand:

First, the priority for Enterprise Applications is stability, not cutting-edge User Experience. Users, and especially customers, require proven and sturdy environments capable of consistently handling massive traffic. This cannot be compromised in favour of the latest UI bells and whistles, not even the newest linguistic asset formats or features.

Secondly, the licensing and pricing model for these applications is such that customers have to monitor their ROI more carefully. Purchasing decisions would not be influenced with yearly or even bi-yearly releases of brand new product lines. The expectation is that these Applications provide a permanent Solution which can be used for several years to come. For that reason, Support contracts tend to include free Patches and even Service Pack upgrades which take care of the more pressing updates.

Last but not least, the efforts required in deploying these server-based technologies are again prohibitive of frequent upgrades. There are  infrastructure implications like matching SQL server versions or multiple server roll-out workload. The technology also needs to co-exist with a number of desktop applications in use in the supply chain.

From reading the SDL TMS 2011 Release Notes, I think the differences with its predecessor, SDL TMS 2007, are very much inline with these requirements. It seems to deliver relevant compatibility updates as well as promising improvements in usability and performance. If the announced increased reliability delivers, then I think one of the key to its success over SDL TMS 2007, will be whether it succeeds at making linguists more willing to work online, or whether they will continue to prefer to use it for File Transfer only and perform the actual linguistic work in their desktop CAT tools.  

Compatibiliy

This is the first major release of SDL TMS since the acquisition of Idiom by SDL back in 2008. Together with the recent release of SDL Worlserver 2011, this confirms that in the short to medium term at least, these two Workflow systems will continue to coexist.

The SDL TMS offering features updated compatibility both in terms of CAT tools and infrastructure:

• CAT: SDL Trados Studio 2009 SP3, SDL MultiTerm 2009 SP3/SP4, SDL Passolo 2011 (incl. word counts accurracy, new dedicated Workflows) and SDL Trisoft
• Infrastructure: LDAP enhancements, Windows Server 2008 and Microsoft SQL Server 2008 support

SDL TMS can be upgraded to version 2011, though only from SDL TMS 2007 SP4 or later. SP4 would have to be installed first, before upgrading from any older version.

One piece of good news is that no data migration is required when upgrading, and all Post-SP4 hotfixes are included in the Upgrader. Microsoft .NET Framework 4 is recommended. 

Usability and Performance

The User Interface has reportedly been made more responsive in several areas: Translation Interface, Job Authorisation, Configuration edits and more. The UI has been updated with a new colour theme, but apart from that the navigation appears to be unchanged. We will investigate in an upcoming article how this may be changed by the addition of SDL Studio Online. SDL Studio Online is an optional web-based version of SDL Trados Studio 2011, exclusive to SDL TMS 2011 SP1.

The Search feature has also been improved with increased speed for the main Search (results are now limited to 2,000 matches) and a new “Go to” feature lets users directly open specific Jobs or Tasks if they know the ID.

SDL Trados Studio can now access SDL TMS directly for TM Concordance and updates. This is achieved through an SDL Open Exchange plug-in. Once installed, users simply need to login using the SDL TMS Server Name, Username and Password, much like previously in SDLX’s SDL Maintain.

Unfortunately, Tageditor’s TTX files can’t be downloaded from SDL TMS 2011.  SDL recommend downloading Packages, which contain the ITD files for translation in either SDLX 2007 or SDL Trados Studio 2009. Eventhough SDLX is considered a part of SDL Trados 2007, this makes using Tageditor and Workbench more difficult and more-or-less means support for Trados 2007 in SDL TMS has been dropped.

Terminology imports have been enabled through a new functionality similar to the TM import added with SDL TMS 2007 SP4. This works using SDL MultiTerm .xml import files and a matching database definition. Passolo Terminology (sequences and TB updates) is also supported.

Here are a few other bug fixes and new features which caught my attention:

• Users can reset their own passwords, which should improve the quality of life of many Workflow managers
• Issues with the second and further pages of the Translation Interface have been fixed (comments, segment history and MultiTerm matches now work)
• TM attributes can be edited from the Edit TM page
• Ampersand(&) and quotes(‘) in ITD names are allowed
• Job-level Project TM availability can be displayed in the Inbox
• PowerPoint SmartArt is supported

Reliability

SDL claim that over 200 reported issues have been resolved, including a number reported by users through ideas.sdl.com.

Improvements in file format support and exception handling should limit the number of failed Jobs and Tasks.

Importantly, progress seems to have been made with Translation Memories exports. A new incremental method, saves having to use server resources to repeatedly perform full exports. This Incremental TM Export option, which is unchecked by default after installation, functions as follows:

• Only segments added or modified since the last export are exported.
• They are added to the latest corresponding TMX export file.
• All TMX export files can be downloaded at once.
• Note: segments deleted from the TM are not removed from the export. A full export (by temporarilly unchecking the Incremental Export box) is required to reflect any deletion

Cheap Translation Tech: Who does What…and for How Much?

Recession-buster CAT tool prices? Low-cost TM Tech? Scrappage scheme on Translation tools older than 2 years?

Subscription-based software rental or money-mental discount on SaaS?

No, the marketing slogans in the Translation Software industry haven’t been quite that exuberant. Yet the cash flow worries experienced by all the Translation Technology providers, have generated a certain amount of creativity especially when it comes to pricing. So if you’re on the market for a new CAT Tool, you should probably ask yourself: “Where is the best value for my discount?”

Clichés about the dark days we live in abound (including in this article…), and it is clear that no one would part lightly with hard-earned cash to buy a Translation Memory technology license. The truth is one can get such technology for as little as €0 and about as much as one has to spend. This may always have been the case, but what I think has changed is that market leaders can no longer rely on reputation, exposure and existing market penetration to comfortably roll-out the next generation of expensive technology.

Differentiating by offering compelling technological advances is no longer a bullet-proof strategy either. There are plenty of talented tool developers around who are ready to offer imaginative solutions for a modest fee. Features such as mobile phone-like predictive text will not prompt anyone to spend thousands, or even hundreds of Euro.

In fact, mainstream TM technology with all its bells and whistles is facing a problem similar to that of the automobile industry: the multitude of options and gadgets inflating the price of applications with constant update and patch requirements has left the market wide open for a good value yet sturdy alternative.

Though it is not a complete answer, a low-cost market for TM tech is developing as a consequence. Freelancers, Agencies and Corporations alike are no longer willing to spend on expensive licenses to buy software which will be outdated within a year or two. So offers started appearing where the license itself has an expiry date. Pay for a year and then decide what to do: renew, upgrade or move on.

The concept of software rental was set to run further of course: complete with the advances in software hosting, Cloud-computing, where the users connect to the application over the internet and does not need to install or setup anything on their own machine, it became SaaS: Software-as-a-Service. This is a trend much bigger than the Translation software industry alone, which offers many advantages such as seemless updates and crucially regular cash-flow for the provider. It also requires an important shift in the mentalities where ownership of the tool isn’t transferred to the Translator, while the ownership of the translation produced with it must remain with them.

All this put together means that we may have reached a fork in the road after which licensing models will be transformed: but which way will they go?

• the unglamorous route of feature-reduced time-limited ownership
• or the controversial path of rental, or Software-as-a-Service.

Both options at this point show serious limitations. The reaction of Professional Translators could be described as luke-warm at best. On one hand entry-level traditional licenses are too limiting to users who already own a fully-fledged copy of a previous version. On the other software rental has not yet earned the trust of the user-base, concerned with intellectual property questions and confusing price structures.

The table on the right-hand side (click to expand) highlights the strengths and weaknesses of some of these subscription-based low-cost CAT tools:

• Trados Studio 2009 Starter Edition
• Translation Workspace
• memoQ translator standard
• Déjà Vu X Standard
• Across Standalone Personal Edition
• Wordfast Anywhere

One thing I hope is sure: the days of paying hundreds of Euro for entry-level licenses are over in our industry, and that has to be a good thing.

If you are due an upgrade, it is most likely that there are good deals to be had on your favorite software provider’s site. If you are looking to invest in your first entry-level CAT tool however, spend some time analyzing your needs against what is on offer. Entry prices may be low, but the value and limitations varies widely from one tool to the next.

SDL TMS 2007 SP4: Some Comments from SDL

Here are some interesting comments from Paul Harrap, Product Manager for TMS at SDL, in reply to my article on SDL TMS 2007 SP4. I’ve also included my own response afterwards.

“(…) I’m very pleased to see we’re getting some coverage in the blogosphere. I’d like to thank you for taking the time to write us up and your positive feedback on the product generally and our new SP4 specifically.

I accept that there’s still some work to do in the product with relation to TM maintenance. As your article accurately reflects, the contents of TMs are updated in TMS in very specific places in the workflow- typically after one or two cycles of review – and what content goes into which TM can be carefully controlled. This is very much by design. We see Translation Memory as the crown-jewel of the linguistic assets of the enterprise customer and so contents are tightly regulated by TMS.

However, we have to acknowledge that bad content can creep into TMs over time – there might be an error in review, or some customers might not review translations quite as thoroughly as others. The changes we made in SP4 to allow the import of files directly into TMs is a response to this requirement. The enterprise can now add/replace contents of a TM directly, without reference to a specific translation job or workflow, as an administrator-level function. This can allow people to quickly and painlessly correct known-bad TUs.

We’re considering including the ability to search through, browse and directly edit the TUs in the TMS browser environment in a future release. While I accept that this is a lacking feature, I wouldn’t concur that we should be putting such power in the hands of the vendor or the freelancer. Seeing the TM as a hugely valuable asset for the enterprise, I expect this is the sort of feature and capability that most enterprises would want to keep in-house.

On the integration with SDL MultiTerm, I very much see a distinction at the moment where TMS is a consumer of Terminology and MultiTerm is the owner of it. Over time we will see much tighter integrations between the SDL products, so the lines between TMS and MultiTerm will very much start to blur, and we have plans to introduce workflow capabilities for term lifecycle management.

On the issue of uploads and downloads and working offline, I think a lot of people would very much agree with you. The single largest corporate user of SDL TMS is… SDL! We have dozens of translation offices around the globe, all of whom deal with the upload and download of files to and from TMS servers based in our hosting centre in London on a daily basis. What tends to drive people offline is the featureset available in the desktop tools. SDL Trados Studio, and its predecessors SDL Trados TagEditor and SDLX, are very powerful productivity tools for the translator. Replicating these features in an online translation environment is a monumental task and it’s  something we are investigating.”

First of all, I would like to thank Paul for this input. Since the ramp up of Trados Studio over a year ago, SDL have made a sustained effort to listen to their user base. The TMS section proves here that they are keeping with this policy.

On the topic of TM Maintenance, which is very close to my heart, I think the business model Paul is presenting is either slightly outdated or, more likely, is missing on a part of their customer base.

From my experience, the outsourcing model has developed so much during this recession that at least in some cases, big enterprises (i.e. the TMS customers) no longer employ Translation Memory management experts. These positions are filled by technicians employed by the LSPs.

Another point is that while TMS customers use Review routinely, they also cannot afford to review all the content they output. Most of the big players have either implemented or are looking into models which allow them to reduce their review cost for languages where the quality is considered stable. This means that TMs may be updated in TMS with contents which hasn’t been reviewed, and consequently that linguists must regularly inspect the TMs and fix any inconsistencies in legacy TUs to prevent reoccurring errors.

I maintain that this task must be assigned to a linguist, and the best placed to do so is a senior Reviewer. Not all of these are in-house, by far.

QA Distiller 7: Sanity Checks on Steroids

QA Distiller is a great quality control tool I came across when I was working on the Marketing project I already mentioned in an article about XML in Localisation.
Developed and distributed by Yagamata Europe, this tool has a lot to offer to client-side engineers, multilingual vendors and freelancers alike. In fact I was even using it to enforce proper and consistent use of Terminology in source marketing content, before sending for localisation.

With the impending release of version 7 at the end of this month, I thought it was the perfect opportunity to talk about it on Loc Loc. The purpose of QA Distiller is to batch process quality checks on bilingual files. Essentially, it performs similar tasks to the QA Checker in Trados‘s TagEditor, but with some major differences.

The benefits

Multiple file processing: QA Distiller allows you to run a highly customizable list of checks on batches of files. There is no need to open of each individual TTX file, or run the QA Checker successively on each one. Just select the files to process, the settings to apply and run the tool to output a comprehensive report for your follow-up. This is a great way to control and enforce consistency across entire handoffs or projects. Translation quality, Terminology consistency etc. are simultaneously audited across all the files selected.

Multi-lingual processing: better yet, this can also be done across all languages at once, which is particularly powerful for controlling Do Not Translate instructions have been adhered to, for example.

Interactive reporting: the report output is another great selling point. It rates and classifies errors and lets you update it as you review and fix or discard candidate errors. It can be exported to a variety of formats where source, target and error details are summarised and categorised. This is very helpful to communicate with vendors on queries, as well as measure the quality od deliveries. Finally, the report has hyperlinks not only to the file, but to the actual segment where the potential error was detected. This makes the implementation of fixes really quick and easy. No more peeling your eyes out to find typos or endless finger-cramping Ctr+F session. If there is an error, QA Distiller will get you right there!

Software stability: my experience (version 6 in Windows XP) has shown very solid performance and compatibility, and certainly far less crashes than SDL’s QA Checker.

Some rare shortcomings

One of the limitations I found in the current version was that the Translation Consistency check did not work when running QA Distiller across several languages. Instead of reading the language code of each file and filtering the comparison, it reported the fact that translations differed from one language to the next. Not particularly helpful.

Secondly, although the pricing structure offers good choice, the full version seems a bit steep at €1000, especially since it also requires Trados to function on TTX files.

Additionnal Technical Information

QA Distiller supports all languages, and a variety of file formats: TRADOStag documents (TTX), FrameMaker RTF (STF), Translation Memory eXchange (TMX).
Terminology can be checked against proprietary-format dictionnaries (DICT) or the industry-standard Term Base eXchange (TBX).

The upcoming version 7 introduces:

• Tag and ID-aware terminology checks
• New Wrench icon funcitonnalities: batch correction of multiple quotation mark and number formatting
• Fine-grained ignore option for improved noise filtering
• Tag and case-independent consistency check
• Full support for Georgian, Malay (Rumi and Jawi), Serbian (Latin and Cyrillic)

The little green man also told me that there are plans to add support for the many different XLIFF flavours like SDL XLIFF, MemoQ XLIFF, WorldServer XLIFF by the first quarter of next year.

For more details, check the cool demo at http://www.qa-distiller.com/movie/‏

SDL Trados Studio 2009: The Compatibility Questions

One by one, SDL continue to address obstacles to our upgrade decisions. Earlier today, one of their webinars tackled the critical topic of Compatibility in Translation Supply Chain. A recording will be available at www.sdl.com, but here is a quick summary for our convenience.

Alignment

This feature is not included in the recent release of SDL Trados Studio 2009. It is planned as an upcoming update, but until then SDL Trados WinAlign or SDL Align from the Trados 2007 Suite must be installed to perform alignment work.
Once the alignment performed in Trados 2007, export to Translator’s Workbench TXT, and import into a Workbench or SDL Maintain TM respectively.
That TM can then be upgraded to a Trados Studio 2009 TM (.sdltm). The export can also be imported directly into an sdltm but with implications regarding TM settings (see section below).

Translation Memories

Upgrading old TMs

Old TMs and bilingual files can be upgraded (File and Server-based supported).
TMX can be imported directly into sdltm, but if imported into tmw or mdb first, the TM settings can be imported into the sdltm.
3rd party TMX may not support this path fully, as they may contain settings specific to the CAT tool used to create them.
The Upgrade Translation Memories wizard in Trados Studio 2009 can batch process various TM formats for various language pairs simultaneously. A Custom option lets you rename the TM output files if required. Segmentation rules can also be imported. Translation Units can be filtered out by field (e.g. you can choose not to include TU’s tagged as “Not approved”).
You can also choose to output as many as TMs as you input, or merge same language pairs independently of their TM formats.

Publishing new TMs to Trados 2007 users

Export to TMX ensures vendors and colleagues who are using Trados 2007 can use your TMs. But this removes support for features like Context Match because information on previous segment, style…is only carried in sdltm.

Creating new TMs from old bilingual files

Importing ttx or itd directly into sdltm (batch) allows Context information to be added (this process however will not carry over any TM setting). It’s a case of either or.

Termbase compatibility

MultiTerm 2007 Termbase can be opened directly and automatically upgraded by MultiTerm Desktop 2009 (it’s one-time operation obviously).
Termbase from earlier versions of MultiTerm have to be converted into xml first, using SDL MultiTerm Convert, before they’re imported into a MultiTerm Desktop 2009 Termbase (.sdltb). Selecting
Catalog-Export allows to export using the Default Export Definition, to export to xml (which can be used by a user with MultiTermT2007)

Bilingual files

TTX and ITD can be opened directly. They will be converted to sdlxliff (e.g. filename.doc.ttx.sdlxliff)
At the end of project they can be saved back to TTX or ITD using
Save Target As. Use select
Original
TRADOStag Document to save as ttx (requires SDL Trados 2007 Suite).

Tag settings files

SDLX and Trados settings files can be upgraded. To do so go to
Tools-Options-File Types- select file type and click Copy to duplicate the default settings file in Trados Studio 2009. Browse to save location and move your new settings file up and down the list to set its priority against the original one. Import the legacy settings

into the new File type setting you created.

TMS and MTO

Compatibility with SDL TMS will be implemented, as soon as integration is available. The date is unconfirmed and SDL advise to stick to SDL Trados 2007 Suite TM, Bilingual and TermBase formats for the time being.

Compatibility with MultiTerm Online will only occur with the upcoming release of MultiTerm Server 2009.

SDL Trados Studio 2009: Installation Guide

As previously announced, SDL released the new version of Trados late last week. To support the launch, the SDL Trados Support team have published some information about installation which I’m relaying here.

System Requirements

Pentium IV Dual Core
2GB RAM
Large screen resolution (1280*1024)
Windows XP SP2, Windows Vista SP1 (32-bit only for both)

(more details on the SDL Support site)

Preparation

1. Return your SDL Trados 2007 Suite Freelance (not Professional) activation code from the License Manager (view Activated License, select it, click Return License). This is a requisite before Trados Studio 2009 upgrade becomes available from your SDL account (due to the upgrade discount).
2. Uninstall beta/rc version (including manually for some files).
3. Uninstall any previous version of MultiTerm.
4. Ensure you have installed SDL Trados 2007 Suite (version 8.2.863 or 8.3.863). This is a pre-requisite to allow TM upgrade and support for ttx and itd in SDL Trados Studio 2009. A full and permanent version of Trados 2007 Suite is available from your SDL account if you have purchased or upgraded to SDL Trados Studio 2009. More info on this is available on the SDL Knowledge Base and ProZ.

Installation

1. Run the SDL Trados Studio 2009 installation (required .NET 3.5 platform included).
2. After completion, the SDL Product Activation wizard appears. It lets the user select between Buy, Purchased and Trial and then the license type (incl. License Server configuration).
3. Run the SDL MultiTerm 2009 Desktop (bundled with all versions of Studio 2009 – SDL MultiTerm 2009 Extract is sold separately).

Configuration

At first run you can select a Profile depending on your keyboard shortcut preference:

• Default: for new users
• SDL Trados: for users of previous Trados versions
• SDLX: for users of previous Trados versions

The rest of the configuration is automatic, and subsequent starts will be faster.

Notes

Winalign 2009 is not released yet. It will be provided for free to Studio 2009 license holders who in the meantime can use the version bundled with Trados 2007 Suite.

License server has not been updated, the existing version works with Trados Studio 2009.

AutoSuggest is included with every license of Studio 2009, but creating dictionaries requires a paying add-on (currently bundled for free for a limited time)

SDL @ Guinness: Trados Studio 2009 Q&A

The SDL Roadshow was in Dublin yesterday.

The “cream” of Ireland’s Localisation community was treated to a big day of product demos and slideshows at the home of the black stuff: the Guinness Storehouse.

As I made my way through Guinness town under a refreshing morning drizzle, I wondered for a minute how the pungent aromas of the early brewing activity would agree with the power breakfast I had had not so long ago.

This was soon to be forgotten however, thanks to a flying start to the proceedings provided by SDL’s Internal Training Manager, Tracey Byrne. Her performance was followed by a few other SDL presentations, as well as a case study on TMS by LSP partner VistaTEC. By the time we reached the Gravity Bar (it must have been 17:59) for some last minute networking opportunities, I think it’s safe to say we were all satisfied by a great event and a fine venue.

There was a lot of information provided throughout the course of the day and I will be releasing separate articles on SDL Passolo 2009 and SDL MultiTerm 2009 soon. What follows below is more directly related to SDL Trados Studio 2009, and what is new or adds to my Preview article. I’m presenting it in a Q&A structure which I hope will be practical to anyone looking for information on specific features, and an easy read for anyone wishing to go through it all. Sláinte!

What is the release date for SDL Trados Suite 2009?

The development cycle has reached Release Candidate stage and SDL are working towards an end of June release target.

Have the development team taken user feedback into account?

Yes, 80 ideas for Trados and 16 for MultiTerm are a reflection of user suggestions on ideas.sdltrados.com

Are TagEditor and Workbench gone?

Yes, Trados Studio combines aspects of SDLX and Trados into a fully integrated User Interface. Even MultiTerm, which still installs separately even though it is bundled with Trados Studio, now offers full functionality from within the Studio UI. SDLX, Workbench and TagEditor simply do not exist anymore.

What are the system requirements?

Here’s what SDL Marketing are saying on the subject of System Requirements:

“SDL Trados Studio supports Microsoft Windows XP and Windows Vista. As minimum requirements, we recommend a Pentium IV-based computer with 1 GB RAM and a screen resolution of 1280×1024. For optimum performance, we recommend 2 GB RAM and a more recent Pentium or compatible processor with a higher screen resolution.”

Please note that this is still subject to change until closer to the launch in June.

What is RevleX™?

It is a new XML-based TM engine. SDL Trados Studio 2009 uses new file formats for bilingual files (.sdlxliff), translation memories (.sdltm) and termbases (.sdltb). It brings together a slew of new features such as Context Matches, AutoPropagation, AutoSuggest™, Multiple TM support etc.

How does AutoSuggest work?

AutoSuggest is an inline predictive text-like feature which provides suggestion from TM, Termbase or dictionaries as you type. Suggestions appear in a context menu, with an icon clearly indicating whether they come from the TM or Termbase etc.The user can customize the maximum number of entries offered. Suggestions start appearing from the first letter typed and keep updating until you select one or finish typing the word.

Can you turn AutoSuggest off?

I’ve also heard this question about Alchemy Catalyst 8.0‘s ezType™. Perhaps from the same person?. The answer is Yes (in both cases), but developers have spent brain cells trying to make these features work in a non-intrusive yet efficient manner so you should probably give it a fair go!

Are Multi-lingual XML files supported?

Bilingual xliff will be supported but there seems to be a question mark on multi-lingual, and SDL said they’d follow-up with me once it’s clarified.

What are the improvements to format filters?

Main progress has been with PDF, XML, FrameMaker and inDesign.

How does the Upgrade TM functionality work?

Trados Studio will convert your old TM into the new format. In the current implementation this requires for the version used to create these TMs to also be present on the same machine. The alternative is to extract the TM on the machine that has the old version and import the content back into a Trados 2009 TM. I was also told that this may yet change and they may be able to include the components of the old version required for TM conversion in Studio 2009. Watch this space!

How is navigating big files in Trados Studio ‘s Editor improved compared to TagEditor or even Trados-aided Word?

The left panel in UI lists the headers and lets you click them to jump to a particular area in the document.

How does the Editor’s Real-Time preview work?

You need to manually generate the preview once. It uses a built-in stylesheet to simulate the end-result. This does not work on DTP file formats.

Can I lock segments in the Editor?

Yes. Context Matches (CM) are locked by default, but the PM can also manually lock other segments.

How is XLIFF supported?

Standard XLIFF are directly supported. The new default format for Trados bilingual files is .sdlxliff which is a proprietary format developed from XLIFF with additional functionality relating to RevleX™

How does QuickPlace work?

To apply formatting, highlight the word or group of words in the target segment, press CTRL + comma. Choose the required formatting from the inline dropdown list. If there is more than one to apply in a segment, QuickPlace will try to guess which is most likely required and offer it at the top of the list. Alternatively you can also hold CTRL, highlight the formatted text in the source segment, and then highlight the text to be formatted in the target segment. Similar applies to Placeables such as figures, measurements etc.

Is there Real-Time verification in the Editor?

Yes. If an error is detected, an icon will appear in the notification area between the source and target segments. The error message can be viewed in the tooltip of this icon or in a dedicated message panel. In case of False positive, simply remove the warning.

Does Trados Studio 2009 support TTX files?

Yes for editing, no for creating.

Is cross-files AutoPropagate available?

No, not in the first release. But there is a workaround: Merge all project files into one.  Cross-file repetitions are also taken into account when creating a package if the “Recompute” option is selected.

Does the Merge feature support all file types?

Yes files of different formats can be merged together. Once merged they can still be viewed and worked on relatively independently.

What is new with Term recognition?

The Editor allows direct access to full MultiTerm functionality. Terms can be cross-reference by ID so if a term is edited, any other term previously linking to it for definition remains linked.

What is the workflow in a scenario where not all participant to a project have upgraded to Trados Studio 2009?

If the Project Manager has upgraded the translators, reviewers etc will have to upgrade in order to use the TMs, to open the bilingual files or use the Termbase. The Project Manager will be able to work with Trados 2007 files (creates a .ttx.sdlxliff) but not create them.

The only alternative is to provide TMX translation memories and not to pre-translate the deliverables.

Can the PM upload project packages through FTP using the Project panel in Trados Studio?

No. Project packages can only be email through Outlook. This is however optional, and FTP can always be done manually once Trados Studio has created said packages.

Can you import customer details?

Yes but only from Outlook.

Can multiple TMs be used in a project?

Yes multiple TMs and Termbases are supported. A priority order between TMs can be set and there is also an option to “Always use the best match”.

What’s new with fuzzy matches?

The fuzzy band values and their number are now fully customizable.

What reference material can be included into a package?

Package can contain global TM settings, Termbases, AutoSuggest dictionaries etc.

Does Perfect Match still exist?

No, it is replaced with Context Match (CM) but may be added back in a later release.

What does Create Package do?

• creates a folder structure
• creates a package per target language if the option is selected
• lets the user define tasks for individual packages
• recomputes wordcount or analysis for cross-file repetitions.

Are files locked for updates while packages are out for translation?

No. It would be a good suggestion for ideas.sdltrados.com, to mirror a functionality in SDL Passolo 2009.

What is the LSP partner program?

52 Language Service Providers have entered various levels of partnership with SDL. The objective is to create value for translation buyers, help LSP’s become experts at translation technology, and promote training and support.

When will training for Trados Studio 2009 be available?

Training for SDL Passolo 2009 is available now. Courses (including upgrade courses) for Trados Studio 2009 will be available at launch. There will be a split between a Translators and a PM path. There will also be a separate SDL MultiTerm 2009 course.

When will certification exams for Trados Studio 2009 be available?

End of September 2009.

Which training and certification path will be on offer?

For Translators:

• Getting Started
• Intermediate
• Advanced
• MultiTerm

For Project Managers:

• SDL Trados Studio 2009 for Project Managers
• SDL MultiTerm 2009 for Project Managers

SDL Trados Studio 2009: Preview

Have you, like me, been slow to adopt Synergy? Do you maybe find it a little cumbersome or incomplete? Would you rather just open Workbench and TagEditor and get on with it? Or perhaps do you (or your clients) still find it easier to use Trados in conjunction with Microsoft Words?

Well, this may be about to change!

Earlier today, SDL conducted one of their very informative Webex meetings to announce a new version of Trados: SDL Trados Studio 2009. The release is due in June 2009, although “Trados 2009” is still in the last stages of development, so some of the features might yet change slightly.

The 1-hour short webinar comprised of 2 parts: a features highlight and a rapid but enlightening desktop-sharing software demo. Here is what I thought was worth bringing up to your attention: 
 

Feature highlights

Integration

This is actually quiet attractive and the reason why I brought up Synergy above. SDL seem to have come up with a truly integrated environment for editing, reviewing, terminology management, project management and all the aspects of Trados related work. No need to open a TM in Workbench, load a TermBase, open a TTX in TagEditor, a document in Word, or turn the coffee machine on.

Productivity

• New TM engine: the xml-based RevleX™. Among other things, it revives contextual match by liberating it from comparing old and new TTX files. Context Match works live, within any new document, and between files within a project.
• AutoPropagation™ immediately translates repeated strings within a document once you have translated the first occurrence.



• Searches can easily be run on both source and target segments.
• Multiple TMs lookup is available.
• AutoSuggest™: predictive text which leverages phrases rather than only segments from your TM as you type.



• Real-Time Preview: check final look as you translate, without navigating to a different tab. This seems very good news for those translators who find Trados tends to disconnect sentences from the whole document and lead translated documents to become a collection of sentences rather than a wholesome piece of work.
• QuickPlace™: improves text formatting, tags, placeables, variables management by providing it in-line.
• DTP application support has been updated and PDF can now be edited directly.

Open platform

• New XLIFF-based default format for bilingual files (.sdlxliff). Yes, this does mean the end of TTX files!
• Improved TMX and TBX support.
• Easy access to API for 3rd party applications.
• Customisable User Interface (UI).

 

Software Demo

As I mentioned before, SDL Trados Studio 2009 builds on Synergy. The interface has the now familiar Visual Studio .net feel which we’ve seen in Synergy as well as other CAT tools.

From the point of view of a Trados user, as in a Workbench + TagEditor user, the integrated aspect really becomes more prominent and inevitable, but in a good way!

Tab views

As expected in a Visual Studio.net application, a number of tabs are available at the bottom left of the UI. Some are familiar, some not:

• Start: provides the general overview.
• Projects: has new project status and Task History panels.
• Files: navigation pane has My Tasks and Sent Tasks folders to promote standardised filing.
• Reports: segment status.
• Editor: contains the entire interactive translation environment (more in the dedicated section below).
• TMs: preview, maintenance, update string, search from within the Trados Studio UI.

Editor

• A document can be opened from the main UI by simply clicking Open Document. But there is also a Windows Explorer context menu shortcut, which seems very efficient compared to opening Workbench, then TagEditor like you would most likely do with your current version of Trados.
• The Editor panel now has TM + Bilingual file+ TermBase + Previews all open at once.
• Source and target segments appear in a very clear and tag-free left-right panel view. This immediately seemed much more welcoming than TagEditor.
• Context Matches are flagged with a CM icon – not dependant on having a matching old ttx, also works live within new documents.
• Formatting can still be copied from source to target.
• Placeable and terms are offered in context (drop down like predictive text). No need to use arrow icons at the top of the UI (keyboard shortcuts still work).
• AutoPropagate seamlessly pre-translates further occurrences of strings you have just translated. They are marked as Unconfirmed 100% (orange instead of green).



• Full terminology functionality is also integrated, including adding to termbase.
• A Review mode allows to filter by match type (e.g. display only Unconfirmed 100% matches within a document for batch review and sign off).
• Editor can edit PDFs (but deliverable output isn’t PDF).

Project view (for PMs)

• Project templates can be saved with a high level of customisation.
• QA Checker is now in version 3.0.
• TM options can be edited from here.
• Dictionaries for AutoSuggest can be added.
• Tasks can be assigned to users during project creation. This information is then included when packages (i.e. translation kits) are created.
• Files can be merged, which creates a single .sdlxliff file out of potentially several file types.



• Batch processing: TM tasks are processed simultaneously (analysis, pre-translate etc.)
• Project package contents:
  
  • Can include Main (or Master) TM.
  • Can include an existing Project TM in a main package or create separate Project TMs if multiple packages (.sdlppx) are distributed.
  • Can link-up with Outlook to send automatically populated Handoffs emails.

  

• TMs view:
  • Can search through source and target.
  • Can upgrade existing TM.
• Requires all participant to be using Studio 2009